BL Touch Guide V3.1

BLTouch auto bed levelling sensor setup 1 R3 20 TH March 2016 This guide was put together from a users experience and is not supported by myself or any printer manufacturer. The BLTouch manufacturer may provide support for their product at this email antclabs@gmail.com and their homepage at www.antclabs.com Mechanical You will need a suitable mount to attach the BLTouch sensor to your printer. One example is here http://www.thingiverse.com/thing:1287411 Thingiverse also has mounts for many other printer types. The mount needs to be adjustable so that the distance between the bottom of the sensor (not the pin) needs to be 8.3mm above the tip of the nozzle. The sensor should also be at least 15mm away